Tube Feeding Supply Planner
Enter a rate and delivered volume that have already been determined for the person’s care.
Your prescribed-feed supplies inputs
Supply arithmetic only.
Prescribed-feed supplies report
10 hours · prescribed-feed run time
5 whole containers for entered delivery plus priming allowance
Full result table
| Run hours | Delivered mL | Delivered kcal |
|---|---|---|
| 0 | 0 | 0 |
| 2.5 | 250 | 300 |
| 5 | 500 | 600 |
| 7.5 | 750 | 900 |
| 10 | 1,000 | 1,200 |
Supply arithmetic only. The page does not choose a feeding rate, formula, dilution, flush schedule or hang-time limit. Priming allowance is stock accounting and is not added to delivered feed energy.
Let’s work it out.
Ask about this tool, enter your values, or understand your result.
Ask in your own language.
How to use Tube Feeding Supply Planner
- Enter a rate and delivered volume that have already been determined for the person’s care.
- Delivered volume determines run time and energy.
- Divide required stock volume by container volume, then round up to a whole container.
Worked example
A 1000 mL feed at 100 mL/hour takes 10 hours. With 20 mL priming and 250 mL containers, five containers cover 1020 mL stock.
Formula, accuracy & limitations
Run hours = prescribed delivered volume / prescribed rate. Feed energy = delivered volume × label density. Stock volume = delivered volume + entered priming allowance. Whole containers = ceiling(stock / container volume).
Supply arithmetic only. The page does not choose a feeding rate, formula, dilution, flush schedule or hang-time limit. Priming allowance is stock accounting and is not added to delivered feed energy.
The primary result is rounded to two decimal places. Calculation tables show up to four and supporting metrics up to six. Very small nonzero values use scientific notation. Display rounding is not fed back into the arithmetic.
Start with an existing prescribed plan
Enter a rate and delivered volume that have already been determined for the person’s care. The calculator checks arithmetic rather than selecting those settings. Label energy density belongs to the actual prepared feed, not a guessed concentration or a recommendation to dilute a product.
Separate feed delivered from stock opened
Delivered volume determines run time and energy. The separate priming allowance contributes to stock needs only. This prevents a common accounting error in which unused priming volume is also counted as energy delivered to the person.
Round containers only after calculating stock
Divide required stock volume by container volume, then round up to a whole container. The report shows packaged volume and the remainder after the entered delivery and priming allowance. That remainder is an accounting quantity, not permission to store or reuse an opened product.
Keep care instructions outside this worksheet
No flush prescription, feeding route, tolerance assessment or safe storage interval is generated. Product instructions and the existing clinical plan determine preparation and handling. The result is a practical supply calculation with its entered assumptions visible.
Frequently asked questions
Does this choose a feeding rate?
The field is for an already prescribed rate. The calculator only divides the entered delivered volume by that rate.
Why is priming not counted as delivered energy?
The priming allowance is additional stock set aside. Only the entered delivered feed volume contributes to the energy calculation.
What if the exact volume needs 4.08 containers?
Whole-container stock rounds up to five. The remainder is shown separately and does not set storage or reuse instructions.
Are flushes and safe hang times included?
Neither is inferred. Use the existing care plan and product handling instructions for those requirements.
